Liquid error (layout/theme line 33): Could not find asset snippets/social-meta-tags.liquid
FITS WRIST SIZES: 6.25 - 8 inches around.
(Pro tip: You can add more holes if needed. Measure your wrist with a piece of string.)
This one's for all of you who requested a Redux two piece strap!
The SL2 two piece strap is a Redux exclusive design executed with American leather and handcrafted right here in New York City and equipped with our original titanium hardware.
This Wickett & Craig leather is traditionally used for saddles, holsters and sheaths. Skirting leather is painstakingly tanned and drum dyed by hand. These hides boasts a subtle waxy finish from the special treatment.
Drum rolling:
COURG crew voted, we listened.
First, TL;DR Features, full notes below (photos for description and not final).
1. We'll add a second layer of leather to line the strap. Whereas many straps use a cheaper leather for stiffening in the second layer, we insisted on using top quality leather for the inner second layer. We think this added expense is worthwhile because it's not just how the strap looks, but how it feels against your skin. I was skeptical at first, because I've been happy with the original raw straps. But when our strap maker said, "That's how I would want my watch strap to be made" -- How could I argue?
2. We'll seal the edge (but not with edge paint -- with a proprietary sealant protocol). In test installations of the edge painted straps, I found it to be bulky and difficult to use. Instead of paint, our strap maker seals the edge with a natural wax formulation to ensure durability and preserve the internal leather grain. Once the wax is applied, the strap maker burnishes the edge with a leather working tool that applies heat and pressure to protect your investment in superior quality American leather.
3. Our strap maker will hand stitch the straps with waxed thread with minimal double knots. The vast majority of you voted for the minimal stitch, which is the one I was leaning towards myself.
4. We're going to fly solo with the Redux & Co. symbol stamped into the tail. In our original production of leather straps, we included additional logo from a production partner and found that many of you would have preferred we left it off. So, that's what we're going to do.
5. We'll finish the tail end with a half hex to complement the gear shape and titanium hardware DNA.
**Please note the buckle we've used was just for the prototypes because we ran out of the buckle type we designed for leather straps:
Photos are representative of the final design but as you know we've been making changes, so just remember these are not exact.
Specifications:
Also available in Clay, Rust, Ballistic nylon.
FITS WRIST SIZES: 6.25 - 8 inches around.
(Pro tip: You can add more holes if needed. Measure your wrist with a piece of string.)
The SL2 two piece strap is a Redux exclusive design executed with American leather and handcrafted right here in New York City and equipped with our original titanium hardware.
This Wickett & Craig leather is traditionally used for saddles, holsters and sheaths. Skirting leather is painstakingly tanned and drum dyed by hand. These hides boasts a subtle waxy finish from the special treatment.
This Clay color is so close to the leather strap I used originally and many of you asked for, but we weren't able to source at the time. But now with the Wickett & Craig, this turned out so much better. The skirting leather will age nicely and develop a personalized patina based on how often you rock it.
Our strap maker's edge finish is sleek and adds just the right amount of darker finish, but not black, which I personally didn't like. The burnish is a nice nuance that will darken over time to a nice dark brown.
Drum rolling:
COURG crew voted, we listened.
First, TL;DR Features, full notes below (photos for description and not final).
1. We'll add a second layer of leather to line the strap. Whereas many straps use a cheaper leather for stiffening in the second layer, we insisted on using top quality leather for the inner second layer. We think this added expense is worthwhile because it's not just how the strap looks, but how it feels against your skin. I was skeptical at first, because I've been happy with the original raw straps. But when our strap maker said, "That's how I would want my watch strap to be made" -- How could I argue?
2. We'll seal the edge (but not with edge paint -- with a proprietary seal protocol). In test installations of the edge painted straps, I found it to be bulky and difficult to use. Instead of paint, our strap maker seals the edge with a natural wax formulation to ensure durability and preserve the internal leather grain. Once the wax is applied, the strap maker burnishes the edge with a leather working tool that applies heat and pressure to protect your investment in superior quality American leather.
3. Our strap maker will hand stitch the straps with waxed thread with minimal double knots. The vast majority of you voted for the minimal stitch, which is the one I was leaning towards myself.
4. We're going to fly solo with the Redux & Co. symbol stamped into the tail. In our original production of leather straps, we included an additional logo from a production partner and found that many of you would have preferred we left it off. And such, this is also our first foray into making our own straps from scratch. So, that's what we're going to do.
5. We'll finish the tail end with a half hex to complement the gear shape and titanium hardware DNA.
**Please note the buckle we've used is just for the prototypes because we didn't have the type we designed for leather straps on hand:
Photos are representative of the final design but as you know we've been making changes, so just remember these are not exact.
Specifications:
2-Piece strap also available in Pitch Black, Rust, Ballistic nylon.