Two Piece Straps
Pitch Black Two Piece American Leather Strap 20mm
FITS WRIST SIZES: 6.25 - 8 inches around.
(Pro tip: You can add more holes if needed. Measure your wrist with a piece of string.)
This one's for all of you who requested a Redux two piece strap!
The SL2 two piece strap is a Redux exclusive design executed with American leather and handcrafted right here in New York City and equipped with our original titanium hardware.
This Wickett & Craig leather is traditionally used for saddles, holsters and sheaths. Skirting leather is painstakingly tanned and drum dyed by hand. These hides boasts a subtle waxy finish from the special treatment.
Drum rolling:
COURG crew voted, we listened.
First, TL;DR Features, full notes below (photos for description and not final).
- Strap Construction: Lined
- Edge: Sealed
- Stitch: Minimal Hand-tied Knot
- Tail Tag: RDX Symbol
- Tail End: Angle Cut
1. We'll add a second layer of leather to line the strap. Whereas many straps use a cheaper leather for stiffening in the second layer, we insisted on using top quality leather for the inner second layer. We think this added expense is worthwhile because it's not just how the strap looks, but how it feels against your skin. I was skeptical at first, because I've been happy with the original raw straps. But when our strap maker said, "That's how I would want my watch strap to be made" -- How could I argue?
2. We'll seal the edge (but not with edge paint -- with a proprietary sealant protocol). In test installations of the edge painted straps, I found it to be bulky and difficult to use. Instead of paint, our strap maker seals the edge with a natural wax formulation to ensure durability and preserve the internal leather grain. Once the wax is applied, the strap maker burnishes the edge with a leather working tool that applies heat and pressure to protect your investment in superior quality American leather.
3. Our strap maker will hand stitch the straps with waxed thread with minimal double knots. The vast majority of you voted for the minimal stitch, which is the one I was leaning towards myself.
4. We're going to fly solo with the Redux & Co. symbol stamped into the tail. In our original production of leather straps, we included additional logo from a production partner and found that many of you would have preferred we left it off. So, that's what we're going to do.
5. We'll finish the tail end with a half hex to complement the gear shape and titanium hardware DNA.
**Please note the buckle we've used was just for the prototypes because we ran out of the buckle type we designed for leather straps:
Photos are representative of the final design but as you know we've been making changes, so just remember these are not exact.
Specifications:
- Buckle section: 80mm / 3.1in.
- Hole section: 125mm / 4.9in.
- Thickness: ≈ 2mm / .08in.
- Width: 20mm
Also available in Clay, Rust, Ballistic nylon.
Ballistic Nylon Two Piece Strap: Black 20mm
FITS WRIST SIZES: 4.5 - 9 inches around.
(Pro tip: You can add more holes if needed. Measure your wrist with a piece of string.)
Say goodbye to generic, clumsy, and cheap strap hardware. You know your time machine deserves better.
We equipped our signature ballistic nylon strap with bead-blasted, exclusively-designed titanium hardware. We machine each buckle from a solid chunk of titanium so that there are zero weak points. No strap spring bar failure that drops your watch into the abyss.
This is an upgraded ballistic nylon material where we incorporate a tighter weave that provides added flexibility and comfort, while preserving the rugged trustworthy dependability.
We make each strap with laser for precision slices that produce a clean finish. Then we sew the hardware on with matching color stitch thread. The strap has a very slight sheen that contrasts nicely.
The two-piece strap is the traditional style you see most often that’s secured to the watch with spring bars, and does not pass under the watch case. It consists of a tail piece and a buckle side.
Our proprietary design moves the titanium hardware closer to the case, so it sits on the outside of the wrist for improved comfort and titanium visibility, because who wants to hide their hardware on the bottom of their wrist? The excess nylon strap can be tucked right back underneath the loop closest to the watch case.
The main benefit of a two-piece is that the watch sits flush against your wrist.
Specifications:
- Redux & Co. etched on first titanium keeper.
- RDX logo etched on the buckle
- Machine washable
- Buckle section: 45 mm | 1.8 in.
- Hole section: 170 mm | 6.7 in.
- Thickness: 1.5mm / .1in.
- Width: 20mm
The beauty of ballistic nylon is that it's self sealing. You can trim off the tail if it's too long and use some gentle heat via lighter or stove burner to reseal the cut edge and prevent fraying.
Care: We recommend placing in a mesh bag and washing in cold water. Hang or lay flat to dry. DO NOT put in the dryer.
This strap will endure constant abuse and anything you throw at it for years to come and along the away it'll acquire a unique personality based on how and where you rock it.
More colors: Olive Drab, Titanium, Desert, Color 8
Did you know? DuPont originally designed ballistic nylon during World War 2 to provide lightweight defense for pilots’ and airmen flak jackets to protect against metal shards or debris from inbound munitions. The researchers developed an exceptionally tight weave, typically basket pattern in 2×2. The thread pattern produces durable construction and limited stretch in all directions.
Supply
Hangar